Lathe Mill Combo,Bench Lathe,Drilling Milling Machine Manufacture
86-551-2565098     [email protected]
EnglishFrançaisDeutschItalianoPortuguêsРусскийEspañol

Metal Working Bench Lathe

» Metal Working Bench Lathe

    • High Precison Metal Working Bench Lathe BL250C

    CATEGORY AND TAGS:
    Metal Working Bench Lathe , ,
    • Precision hardended and ground gear drive headstock
    • Powerfull 1HP AC motor
    • 5-1/3” wide two precision’V’- beds are hardened and ground
    • 1” diameter spindle bore with MT5 spindle taper
    • 6 steps spindle speed from110 – 1800rpm under lower noise
    • 28” length of distance between centers
    • Auto longitudinal feeding
    • Chuck safety guard with limit switch protection
    • Tool-post safety guard
    • Encompassed on stong cast-iron rib webbing
    • Dovetailed cross and compound sliders
    • 5” self-centring three jaw chuck with reversible top jaw
    enquiry
    • Specifications

    High Precison Metal Working Bench Lathe BL250C

    The metal lathe is an incredible value, Produced with precision slides and guideways. A gear headstock lets you select spindle speed without having to fuss with belts or pulleys, Shifting gears is as easy as switch a couple of front mounted leavers.

    Product Feature

    • Precision hardended and ground gear drive headstock
    • Powerfull 1HP AC motor
    • 5-1/3” wide two precision’V’- beds are hardened and ground
    • 1” diameter spindle bore with MT5 spindle taper
    • 6 steps spindle speed from110 – 1800rpm under lower noise
    • 28” length of distance between centers
    • Auto longitudinal feeding
    • Chuck safety guard with limit switch protection
    • Tool-post safety guard
    • Encompassed on stong cast-iron rib webbing
    • Dovetailed cross and compound sliders
    • 5” self-centring three jaw chuck with reversible top jaw

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    SPECIFICATIONS      

    Specifications BL250C
    Swing over bed 车床上回转直径 250mm
    Swing over cross slide 床鞍上回转直径 130mm
    Distance between centers 顶尖距离 450 / 700mm
    Taper of spindle bore 主轴锥度 MT4#
    Width of bed 床身宽度 125mm
    Spindle bore 主轴通孔 27mm
    Range of spindle speeds 主轴转速 105—1650rpm
    Auto-Feeding in Longitudinal 纵向自动走刀 0.05mm/r
    Inch threading 英制螺纹 8—56TPI
    Metric threading 公制螺纹 0.2—3.5mm
    Travel of compound slide 小刀台行程 70mm
    Tool Section 刀杆截面积 12x12mm
    T-Slot T型槽尺寸 2x10x110mm
    Travel of cross slide 中托板行程 115mm
    Tailstock quill travel 尾架套筒行程 70mm
    Tailstock Diameter 尾架套筒直径 30mm
    Taper of tailstock quill 尾架锥度 MT2#
    Motor power 主电机功率 750W
    N./G. weight 净/毛重 215/235kg
    Dimensoins 外形尺寸 1450x580x580mm

    STANDARD ACCESSORIES       

    OPTIONAL ACCESSORIES BY EXTRA COST            

    Enquiry Form (we will get back to you ASAP)

    Name:
    *
    Email:
    *
    Message:

    Verification:
    5 + 9 = ?

    Maybe you like also